0-6-0 Tram Engine
From PikkaWiki
(Difference between revisions)
| Line 26: | Line 26: | ||
|40kN | |40kN | ||
|- | |- | ||
| − | !|Drawn | + | !|Drawn by: |
|DanMacK | |DanMacK | ||
| + | |||
| + | ==Prototype information== | ||
| + | The tram engine in the Add-On Set is based on the LNER [http://www.lner.info/locos/J/j70.shtml J70 tram engines]. These locomotives were designed for use on the Wisbech and Upwell tramway line which ran extensively along public roads. They were fitted with side guards, cow catchers and warning bells as per Board of Trade regulations. The J70 is probably best known as the prototype for Toby the Tram from the Rev. Awdry's Railway Series. | ||
Revision as of 13:10, 31 July 2010
The 0-6-0 Tram Engine is a steam locomotive in the UK Railway Set Add-on Set.
Statistics and information
| Type: | Mixed Traffic Tram Locomotive |
|---|---|
| Introduction: | 1905 |
| Withdrawal: | 1955 |
| Speed: | 15mph |
| Power: | 400hp |
| Weight: | 27t |
| Tractive Effort: | 40kN |
| Drawn by: | DanMacK
Prototype informationThe tram engine in the Add-On Set is based on the LNER J70 tram engines. These locomotives were designed for use on the Wisbech and Upwell tramway line which ran extensively along public roads. They were fitted with side guards, cow catchers and warning bells as per Board of Trade regulations. The J70 is probably best known as the prototype for Toby the Tram from the Rev. Awdry's Railway Series. |
